€ 375,00 - € 4.942,50 Eenheidsprijs € 375,00
| 1 week | 2 weken | 3 weken | 4+ weken |
|---|---|---|---|
| € 375,- | € 532,50 | € 690,- | Op aanvraag |
* Emergency service: < 48 hours upon request < 1 week €39.50
* Installations > 2 floors, or our parking is > 10 meters from the entrance door? There’s a surcharge of €32.50 for this.
* Extend? No problem! We charge €19.99 per extension plus our daily/weekly/rate.
| Cabin dimensions (w x l x h) | 2,67 x 0,89 x 2,05 m |
| Mounting dimensions (w x l x h) | 2,67 x 1,20 x 2,25 m |
| Distance to drain | +/- 5 m |
| Suitable drainage | sink / washing machine drain / rainwater drain |
| Distance to supply | +/- 10 m |
| Suitable supply | mixer tap / thermostatic tap / cold water tap (filling tap) |
| Consumption of hot water supply | 2 x 3,5 kWh |
The Sani-Box shower + toilet + changing room combination is the ideal solution for your renovation, remodel, or rehabilitation.
Thanks to the unique, demountable design of our cubicle, you don’t have to worry about limited access and the combination can be installed anywhere, both indoors and outdoors.
You can choose between two types of toilet, both of which function perfectly without the need for a sewer or water connection.
The dry toilet uses specially developed lid bags. These are supplied as standard with the toilet and can be immediately sealed to be odor- and germ-proof. Once the lid bag is closed, it can simply be disposed of with household waste.
Before installing the combination, please consider the following points. Our installer will take care of the entire installation.
Required space for installation: W x L x H (2.67 x 1.20 x 2.25 m)
The dimensions listed above are required for installing the combination. The distance to the drain (approximately 5 m) is the determining factor for the location of the combination. Examples of locations include the garage, garden, kitchen, bedroom, or attic. Since the shower is delivered in parts, limited access is not a problem.
Water supply (approximately 10 m)
The supply hose is connected to a tap within a 10-meter radius. Our included accessories attach the hose with a hose coupling that can be disconnected when the shower is not in use. This allows you to continue using the tap.
Cold water tap
When the supply hose is connected to a cold water tap, the water is heated by our included hot water supply. This supply is powered and offers the advantage of allowing you to continue showering indefinitely without any heating-up time.
Mixer tap, thermostatic tap
When the supply hose is connected to a mixer or thermostatic tap, you do not need a hot water supply.
Drainage (+/- 5 m)
The drain hose is connected to a drain within a 5 m radius.
The sink, rainwater drain, or washing machine drain can be used as the outlet. Thanks to the included drain pump, even a higher drain is no problem. The diameter of our drain hose is 32 mm.
Hot water consumption (2 x 16 amps, 3.5 kWh)
When the shower is connected to a cold water tap, the water is heated by our hot water supply. This unit is equipped with two power cords, both of which must be connected to a grounded outlet. Due to the required power (2 x 16 amps, 3.5 kW), two circuits must be available: one unloaded (free) circuit with a grounding connection, and a second grounded circuit that can be loaded.
All necessary accessories are included as standard to ensure a smooth installation.